Philco PD 1045 EA, Руководство пользователя

Страница: 9 / 130

Copyright © 2020, Fast ČR, a. s. Revision 12/2021
EN - 7
Water inlet hose
Do not use the water inlet hose of your old machine,if any. Use the new water
inlet hose supplied with your machine instead. If you are going to connect a
new or long - unused water inlet hose to your machine ,run water through it
for a while before making the connection. Connect the water inlet hose
directly to the water inlet tap. The pressure supplied by the tap should be at a
minimum of 0.03 Mpa and and at a maximum of 1 Mpa.If the water pressure is
above 1 Mpa,a pressure-relief valve should be fitted inbetween.
After the connections are made, the tap should be turned on fully and checked for water tightness. For the
safety of your machine, make sure to always turn off the water inlet tap after each wash programme is finished.
NOTE:
Aquastop water spout is used in some models. In case of using
Aquastop, a dangerous tension exists.
Do not cut Aquastop water spout. Do not let it get folded or twisted.
Note printing on the water inlet hose!
If models are marked with 25°, the water temperature may be max. 25 °C (cold water).
Forall other models:
Cold water preferred; hot water max. temperature 60 °C.