Philco PD 1045 EA, Руководство пользователя

Страница: 17 / 130

Copyright © 2020, Fast ČR, a. s. Revision 12/2021
EN - 15
PART 5: LOADING YOUR DISHWASHER
For best results, follow these loading guidelines.
Loading the household dishwasher up to the capacity
indicated by the manufacturer will contribute to
energy and water savings.
Manual pre-rinsing of tableware items leads to
increased water and energy consumption and is not
recommended.
You can place cups, glasses, stemware, small plates,
bowls, etc. in upper basket.
Do not lean long glasses against one another or they
cannot remain steady and may receive damage.
When placing long stem glasses and goblets, lean
them against the basket edge or rack and not against
other items.
Place all containers such as cups, glasses and pots into
the dishwasher with the opening facing downwards
otherwise water can collect on items.
If there is cutlery basket in machine, you are
recommended to use the cutlery grid in order to
obtain the best result. Place all large (pots, pans, lids,
plates, bowls etc.) and very dirty items in the lower
rack.
Dishes and cutlery should not be placed above each
other.
WARNING!
Take care not to obstruct the rotation of spray
arms.
WARNING!
Make sure after loading the dishes do not prevent
opening the detergent dispenser.
Recommendations
Remove any coarse residue on dishes before placing
the dishes in the machine. Start the machine with full
load.
NOTE:
Do not overload the drawers or place dishes in the
wrong basket.
WARNING!
To avoid any possible injuries, place long-handle
and sharp-pointed knives with their sharp points
facing down or horizontally on the baskets.
Dish rack
There are dish racks on the upper basket of your
machine.
a b
You can use these dish racks in open
or closed position. When they are in open position
a
you can place your cups on them; and when in closed
position
b
you can place long glasses on the basket.
Also, you can use these racks by placing long forks,
knives and spoons on them laterally.
Top basket height adjustment while it is full
Upper Basket
Height adjustment
Turn the Rail Stop Clips, at the ends of the rails, to the
sides to open them (as shown in the image below),
then pull out and remove the basket. Change the
position of the wheels, then reinstall the basket to
the rail, making sure to close the Rail Stop Clips. When
the upper basket is in the higher position, large items
such as pans can be placed on the lower basket.