Philco PD 1045 EA, Руководство пользователя, Страница: 14 / 130

Copyright © 2020, Fast ČR, a. s. Revision 12/2021
EN - 12
Test Strip
Run water
through the
tap (1min.)
1
minute
1
minute
1
second
Keep the strip
in the water
(1sec)
Shake the
strip.
Wait
(1min.)
Set the hardness level of
your machine.
NOTE:
The level is set to 3 as default. If the water is well water or has a hardness level above 90 dF, we recommend
that you use filter and refinement devices.
Water Hardness Table
Level German dH French dF British dE Indicator
1 0-5 0-9 0-6 Wash LED is on.
2 6-1 10-20 7-14 Dry LED is on.
3 12-17 21-30 15-21 End button is on.
4 18-22 31-40 22-28 Wash and Dry LEDs are on.
5 23-34 41-60 29-42 Wash and End LEDs are on.
6 35-50 61-90 43-63 Dry and End LEDs are on.
Water Softener System
The dishwasher is equipped with a water softener which reduces the hardness in the mains water supply. To
find out the hardness level of your tap water, contact your water company or use the test strip (if available).
Setting
• Turn on the machine by pressing the On/Off button.
• Press the Up button for at least 3” immediately after the machine is turned on.
• Release the Up button when all leds blink once. The last setting level is viewed.
• Press the Up or Down button to increase or decrease the hardness level respectively.
• Turn off the machine to save the setting.