Philco PARC09GGAWM, Руководство пользователя

Страница: 17 / 24

16
Cleaning and Maintenance
Maintenance
Indoor Unit and Remote Control
Cleaning
Cleaning the Filters
Panel
bracket
Dust filter handle
The following maintenance operations must be performed regularly.
*
The operation must be performed by qualified personnel only.
• Stop the air conditioner and disconnect the power supply
before cleaning.
• Use a dry cloth to wipe the indoor unit and remote
control.
• A cloth dampened with cold water may be used on the
indoor unit if it is too dirty.
• The front panel of the indoor unit cant be removed and
cleaned with water. Then wipe with a dry cloth.
• Do not use brushes, emery paper or burnishes to clean
the unit because it may cause damages.
• Do not use a chemically treated cloth or duster to clean
the unit.
• Do not use benzine, thinner, polishing powder or similar
solvents for cleaning. These may cause the plastic
surface to crack or deform.
• Never use warm water over 40ºC to clean the front panel,
it may cause deformation or discoloration.
Note: Supply power must be disconnected before cleaning.
A clogged dust filter reduces the cooling/heating efficiency of
this unit. Please clean the filter every month or more often if
necessary.
warning
Items Maintenance operations Recommended frequency
Dust filter Clean Every month or more often if necessary
Healthy air filters Replace/clean Every 3 months or more often if necessary
Unit casing Clean Every month or more often if necessary
Water tray and
evacuation piping
Clean and check for
obstructions
Each season before start up*
Indoor and outdoor coils Clean Each season before start up*
3 Then pull the dust filter downwards out of the indoor unit.
2 Hold the dust filter handle and lift it up slightly to take it out
from the filter holder.
1 Lift the indoor unit front panel up to an angle until it stops
with a full support from the bracket.