Philco PARC09GGAWM, Руководство пользователя

Страница: 7 / 24

6
/LJKW
7XUER &OHDQ
7LPHU2Q 7HPS
7LPHU2II
6ZLQJ 0\7HPS (FR
)DQ
&ORFN
0RGH
Remote Control
tips and information
• When changing batteries, do not use old or varied
ones, otherwise, it may cause problems with the remote
control.
• If the remote control is not used for a long time, remove
the batteries as old batteries may leak or corrode and
damage the remote control.
• The battery life during normal use is about six months.
• If the remote control does not operate normally, please
remove and refit the batteries. If abnormal operation
continues, replace with new batteries.
• Keep the remote control where its signal can reach the
receiver of the indoor unit (a maximum distance of 8m is
allowed).
• When you select the timer operation, the remote control
automatically transmits a signal to the indoor unit at the
specified time.
• The air conditioner will not operate if curtains, doors or
other materials block the signals from the remote control
to the indoor unit.
• Prevent any liquid from falling into the remote control. Do
not expose the remote control to direct sunlight or heat.
• If the infrared signal receiver on the indoor unit is
exposed to direct sunlight, the air conditioner may not
function properly. Use curtains to prevent the sunlight
from falling on the receiver.
• If other electrical appliances react to the remote control,
either move these appliances or consult your local dealer.
Indoor Unit Display
Signal
receiver
• If you keep the remote control in a position that hinders
proper signal transmission, a time lag of up to 15 minutes
may occur.
• When the remote control sends out a signal, the symbol
will blink for about 1 second on the display. The indoor unit
will acknowledge the signal with a beep when it receives an
effective signal.
My Temp indicator
It lights when I Feel function is activated.
Turbo indicator
Illuminates during Turbo operation.
Eco (Economy) indicator
Illuminates when ECO function is in operation.
Temperature indicator
Displays the temperature settings when the air conditioner
is in operation.
Timer indicator
The indicator illuminates when Timer is set ON and/or
OFF.
Swing indicator
It lights when the Swing function is activated.
caution
How to use the Remote Control
• Point the remote control to the signal receiver of indoor unit.
•
Make sure there is no obstacle that may interfere with the
signal.
Location of the remote control
Battery installation/replacement
• Slide the battery compartment cover off and insert two new
alkaline dry batteries (2x AAA1.5Volt). Make sure that the
polarity of (+) or (-) is installed correctly.
• Slide the battery compartment cover back on
8m
Light
Turbo
Timer-On Temp
Timer-Off
Swing Eco
Fan
Clock
Mode