Philco PARC09GGAWM, Руководство пользователя

Страница: 18 / 24

17
General maintenance
Dust filter
Do not touch or try to clean the cold plasma
generator (if applicable). It may cause an electric
shock.
• Do not touch the metal parts of the unit when removing
the filter. Injuries can occur when handling sharp metal
edges.
• Do not use water to clean inside the air conditioner.
Exposure to water can destroy the insulation, leading to
possible electric shock.
• When cleaning the unit, first make sure that the power
and circuit breaker are turned off.
Dust filter
Healthy filter
If the air conditioner is not going to be used for a long period of
time:
• Operate in FAN only mode for 3~4 hours to allow the unit to
completely dry out.
• Switch off the unit and pull out the power plug. Remove the
batteries from the remote control.
• The outdoor unit requires periodic maintenance and
cleaning. Do not attempt to do this yourself. Contact your
dealer or service technician.
Checks before operation
• Check that the wiring is not broken or disconnected
• Check that the dust filter is installed.
•
Check if the air outlet or inlet is blocked if the air conditioner
has not been used for a long time.
warning
warning
6 Install the upper portion of dust filers back into the unit,
taking care that the left and right edges line up correctly
and place dust filters into position.
5 Install the healthy air freshening filters back in position.
4 The healthy air freshening filters (if applicable) like Active
carbon filter / BIO filter / Vitamin C filter / Silver ion filter are
fixed on the dust filter.
Remove the healthy filters from the support frame of the
dust filter.
Clean the healthy filters at least every three (3) months and
replace every 6 months.
Clean with vacuum cleaner if possible.
Clean the Dust filter with a vacuum cleaner or water, then
dry it up in cool place.