Phihong POE125U-4AT-N-R Скачать руководство пользователя

Страница: 44 / 44

Phihong USA Corporation | 47800 Fremont Blvd., Fremont, CA 94538 | 1.510.445.0100 | www.phihong.com

7. Frequently Asked Questions

Q1:

What should I do if I forgot the hostname?

A1:

You can

connect the Midspan to your PC directly, use default IP 10.0.2.5 to open the web or

make SNMP contact (see details in section

TFTP uploading (Power-On Reset Entry Mode)

You can

find the hostname in the web display or read the contents of the OID <hostname> in

SNMP.

Q2:

What should I do if I forgot the login username and password?

A2:

If you still know the SNMP community strings, open the SNMP interface and set a value ‘1’

for the OID <restore>, the midspan restores itself to the factory defaults. You can reset with your
new login username and password.

Q3:

What should I do if I forget the SNMP community strings?

A3:

If you still know the web login username and password, open System Tools in the web

interface, click on the

Restore Defaults

button. Your midspan will restore to its factory default

settings. You can reset your new Read-Write Community String and Read-Only Community
Strings on the SNMP webpage.

Q4:

What should I do if I forgot both login credentials and SNMP community strings?

A4:

Please contact Phihong Support directly for further information on this topic.

Q5:

There is no Configuration menu on the HTTP webpage, what should I do?

A5:

Make sure that your web browser is compatible with the ones listed below. If it is not then

upgrading would be the best solution.

Q6:

My PC has Internet Explorer 7. After I use the Reboot function under the menu

Configure/System Tools three times, the hostname link on Reboot page doesn’t work anymore.

A6:

Close the browser and re-open a new window. This is a known limitation with the Internet

Explorer 7 program. There are no other known restrictions on IE7 at this time. You can also
upgrade your Internet Explorer to latest version IE8. Other compatible web browsers include
Firefox, Opera, Google Chrome, and Safari.

Содержание POE125U-4AT-N-R













































Результаты поиска

Содержание POE125U-4AT-N-R

Отзывы:

Похожие инструкции для POE125U-4AT-N-R

Бренды по названию

Популярные бренды

Phihong POE125U-4AT-N-R, Руководство пользователя

Результаты поиска

Содержание POE125U-4AT-N-R

Отзывы:

Похожие инструкции для POE125U-4AT-N-R

Бренды по названию

Популярные бренды