Phihong DC EVSE 60KW Скачать руководство пользователя

Страница: 49 / 58

6. Maintenance

•

The DC Fast Charger is cooled by forced air. Please keep charger in a ventilated

location and do not block the air vents of the DC Fast Charger.

•

Please clean or replace the air filters regularly to ensure the DC Fast Charger

works properly.

•

Please keep the exterior of DC Fast Charger clean at all times and do not spray

water directly at the DC Fast Charger.

•

If there is water intruding into the DC Fast Charger then please cut off the power

source immediately and contact the DC Fast Charger provider for repair.

•

Please make sure the charging connector is returned to the holder of the

charging connector after charging to prevent damage.

•

If there is damage to the charging connector, charging cable or holder of the

charging connector then please contact the DC Fast Charger provider.

•

When using the DC Fast Charger please handle properly. Do not strike or scrape

the cabinet or touch screen.

•

If the enclosure or touch screen is broken, cracked, open or shows any other indi-

cation of damage then please contact the DC Fast Charger provider.

6.1 General Maintenance

WARNING:

Danger of electrical shock or injury. Turn OFF power at the

panelboard or load center before working on the equipment or remov-

ing any component. Do not remove circuit protective devices or any

other component until the power is turned OFF.

•

Disconnect electrical power to the DC Fast Charger before any maintenance work

to ensure it is separated from the supply of AC mains. Failure to do so may cause

physical injury or damage to the electrical system and charging unit.

Содержание DC EVSE 60KW



























































Результаты поиска

Содержание DC EVSE 60KW

Отзывы:

Похожие инструкции для DC EVSE 60KW

Бренды по названию

Популярные бренды

Phihong DC EVSE 60KW, Руководство пользователя и инструкции по установке

Результаты поиска

Содержание DC EVSE 60KW

Отзывы:

Похожие инструкции для DC EVSE 60KW

Бренды по названию

Популярные бренды