AW Series - User Manual
25
192.168.1.10
Account
admin
Password
1231231238
login https://192.168.1.10
8.7 Re-checking the Wi-Fi and 4G Signal Strength
on Power-Up.
STEP1/
Connect the RJ45 cable to the charger.
Connect the RJ45 cable to the notebook.
Use the following IP addresss :
IP sddress: 192 . 168 . 1 . 1
Subnet mask: 255 . 255 . 255 . 0
Default gateway: . . .
After restarting the charger, check the connection signal strength.
The RSSI (Received Signal Strength Indication) should be higher than
-65dBm. If the value is lower, you may experience a weak Wi-Fi signal
connection or even disconnection. The cause could be interference.
192.168.1.10
SET
UPGRADE OTHER LANGUAGE
System
System
Charging
Network
Backend
STEP4/
Select "SET" at the top of the webpage
to enter the settings page. Select “Network” to
enter the network settings page.
STEP2/
Change the IP Address on your laptop
computer by accessing the network card
settings. Change the TCP / IP automatic IP to
fixed IP.
•
IP Address:192.168.1.1
•
Subnet Mask:255.255.255.0
STEP3/
Open a browser and enter IP Address
192.168.1.10 to login into the setup page. Use
the following credentials to login.
•
Account: admin
•
Password: 1231231238
