PHICOMM K3C, Руководство пользователя

Страница: 7 / 50

Phicomm K3C - AC1900 Smart Wi-Fi Router
DEVICE IS GETTING WARM AFTER PROLONGED USE
When using your device for prolonged periods the device may become warm. In most cases
this condition is normal and therefore should not be interpreted as a problem with the
device.
HEED SERVICE MARKING
Except as explained in the user manual, do not repair any product yourself. Service needed
on components inside the device should be done by an authorized service outlet or
provider.
Phicomm (Shanghai) Co., Ltd. is entitled to use new or reconditioned replacements parts
or boards for repairs under warranty, provided they have the same functionality as the parts
to be replaced.
DAMAGE REQUIRING SERVICE
Unplug the device from the electrical outlet and refer servicing to an authorized service
center or provider under the following conditions:

Liquid has been spilled or an object has fallen onto the product.

The product has to been exposed to rain or water.

There are noticeable signs of overheating.

The product does not operate normally when you follow the operating instructions.
AVOID HOT AREAS
The product should be placed away from heat sources such as radiators, heat registers,
stoves, or other products (including amplifiers) that products heat.
AVOID WET AREAS
Never use the product in a wet location.
AVOID USING YOUR DEVICE AFTER A DRAMATIC CHANGE IN TEMPERATURE
When you move your device between environments with very different temperature and/or
humidity ranges, condensation may form on or within the device. To avoid damaging the
device, allow sufficient time for the moisture to evaporate before using the device.
NOTICE: When taking the device from low-temperature conditions into a warmer
environment or from high-temperature conditions into a cooler environment, allow the
device to acclimate to room temperature before turning on power.
AVOID PUSHING OBJECTS INTO THE DEVICE
Never push objects of any kind into cabinet slots or other openings in the product. Slots
and openings are provided for ventilation. These openings must not be blocked or covered.