150Mbps Wireless N ADSL2/2+ Modem Router
www.phicomm.com
29
Chapter 4: Software Configuration
Wireless MAC Address Filter:
Wireless access can be filtered by using the MAC addresses of the
wireless devices transmitting within your network’s radius. To filter wireless clients by MAC
Address, either deny or allow access. If you do not wish to filter users by MAC Address, select
Deactivated.
Active: Used to enable or disable this wireless Mac filter function.
Action: Choose Allow or Deny to allow or block wireless access from the devices listed on the
screen.
Mac Address:
Enter the MAC Address you wish to filter in the field.
Advanced Setup
Choose Advanced Setup, you can see six submenus. Click any of them, and you will be able to
configure the corresponding function.