10
Remote Operation
Press once the button on the remote control this turns the fire and flame effect. The
same display show room temperature, date and clock lighten, flame show forth level.
The display will be unshow in 15s if no operation. Press any button to awaken display.
Press
once the button on the remote control to switch it.
Press
once the button on the remote control to set the desired flame brightness and
there will be 4 levels flame brightness available.
Press
once the button on the remote control (if your fireplace has this function) to set
the desired flame color and there will be 10 flame colors available. They are orange,
red, green, blue and a mix between colors. Ten colors one cycle. Press the button 5 seconds, ten
colors automatic cycle by ten seconds.
Press
once the button for the low heat settings;
lighten on the display. Press twice
to switch the heat setting off.
Press
once the button for the high heat settings;
lighten on the display. Press
twice to switch the heat setting off.
Automatic heating operations (Intelligent Control)
Press once the button to open automatic, according to your timer setting.
1. If this day have no timer setting, the fire will be turn off
2. If room temperature is more than setting ,heat will be turn off
3. If room temperature is 5 degree less than setting ,heat will be turn on low setting
4. If room temperature is 5 degree more than setting ,heat will be turn on high setting
Date and time settings operations
It’s operated by supplied remote control.
Press once the button and continue to press the + button or the – button to set the hour (from
00-23).
