6
Step 4:
Attach the fixing angle(Part No.4) to bottom of the appliance using 2 short
screws (Part No.3). See
Fig. D
Step 5:
Carefully lift the appliance and mount it to the metal wall bracket.
Do not let the appliance go until you are sure it is safely engaged to the bracket.
See
Fig.E
Step 6:
Now mark the hole position for fixing the angle.
Carefully remove the appliance from the bracket, drill 2 holes 8 mm (5/16in) in
diameter and 43 mm (1.7 in) deep on the marked locations.
Clean the holes from dust, install the supplied wall anchors into the holes, and gently
tap them into place with a hammer until the flange of the wall anchor is flush with the
wall surface.
Then Lift up the appliance again, engage it to the bracket and finally fix the angle with
screws as shown in
Fig. F.
