7
PM5A2
Keyboard (Cont’d)
KEY
FUNCTION
LED
Selection of 2.5 kV test voltage
Indicates 2.5 kV
selected
Selection of 5 kV test voltage
Indicates 5 kV selected
These keys (decrease or increase)
enable the selection of the value
that is being programmed.
–
Activates / enables programming of
the limit for the “Pass / Fail” test
Indicates when the
measured resistance is
lower than programmed
limit
Start
- Start test
Indicates that the test is
being executed
Stop
- End of test
–
2.2. Display
Measurement results in the corresponding measuring unit, elapsed time since the measurement started, selected
test voltage, analog indication by means of a bar graph, and several messages to the operator are displayed on
alphanumeric LCD.
