19
PM5A2
10. Printer
To enable the printing function press
key. Measured values will be printed each 15 seconds, and the
Dielectric Absorption Index and Polarization Index will be printed after 1 minute and 10 minutes respectively.
Printing may be started or stopped at any time during the test. However, it is convenient to turn the printer on
before starting the test in order to print it completely, including the heading.
CAUTION:
Don’t pull the paper. The printer can be easily
damaged.
This printer uses 56mm-wide thermal paper, which comes in a 30mm-diameter reel.
Pull the lever located on the lid.
Insert the paper reel as shown in the figure.
Keep the tip of the paper out of the printer and close the lid.
11. Cleaning
The panel, terminals, and connectors of the equipment must stay dry and clean. Cleaning should be made using a
soft detergent or isopropyl alcohol (be sure that the products to be used for cleaning do not affect plastic goods).
