30
OPTIONAL COMPONENT
Installation of MTR-4015LH
1.
Remove a cap for the fixing screw on the panel cover for
mounting space for a temperature recorder.
2.
Remove the fixing screw and open the panel cover.
(Fig. 1)
3.
Remove the panel cover by pushing the shaft on both
side outward.
4.
Attach the temperature recorder (MTR-4015LH) to the
recorder fixing (MPR-S30: optional component) by using
the enclosed screws. (Fig. 2)
5.
Mount the recorder fixing with recorder to the mounting
space for a temperature recorder. (Fig. 3)
6.
Route the recorder sensor and capillary tube as shown
in the procedure 3 through 8 on page 30 and fix the
recorder sensor on the freezer wall (Fig. 4).
Note:
The temperature recorder MTR-4015LH cannot be
installed at the right corner on the top of the cabinet even if
the temperature recorder for refrigerator (MTR-0621LH) is
not installed there.
Shaft
Fixing screw
Panel cover
Fig. 1
Recorder
fixing
Recorder sensor
Fig. 2
Fig. 3
Fig. 4
