Phcbi MDF-U443, Руководство по эксплуатации

Страница: 36 / 40

34
SPECIFICATIONS
Product name
Biomedical Freezer
MDF-U443
Medical purpose Storage of DNAs, plasma.
External dimensions W800 mm x D832 mm x H1,810 mm
Internal dimensions W640 mm x D615 mm x H1,090 mm
Effective capacity 426 L
Exterior Painted steel
Interior Stainless steel plate
Door Painted steel
Inner door Acrylic resin, 2 doors
Shelf Polyethylene coated wire, 5 shelves, Max. load; 50 kg/shelf
Access port Inner diameter 40 mm, Left side, rear
Insulation Rigid polyurethane foamed-in place
Compressor Hermetic reciprocate type (high stage side), Hermetic reciprocate type (low stage side)
Compressor motor Output 450 W (high stage side), Output 750 W (low stage side)
Evaporator Shell and tube type (high stage side), Fin and tube type (low stage side)
Condenser Fin and tube type (high stage side), Shell and tube type (low stage side)
Condenser fan motor 10 W
Cooling fan motor 9 W (in the chamber)
Refrigerant R-134a(HFC-134a) (high stage side), R-404A (low stage side)
Temperature control Microprocessor control system
Temperature display Digital display
Temperature sensor Thermister sensor
Alarm
High temperature alarm, Low temperature alarm, Power failure alarm,
Filter alarm, Door alarm
Remote alarm contact Allowable capacity: DC 30 V, 2 A
Battery
For power failure alarm; Nickel-metal-hydride battery, DC 6 V, 1100 mAh,
Auto-recharge
Weight 213 kg
Accessories 1 set of key, 1 temperature sensor cover, 2 nylon clips, 1 scraper
Optional component Temperature recorder (MTR-4015LH, MTR-85H)
Note :
• Design or specifications will be changed without notice.
• Refer to the updated catalog when ordering an optional component.
• The battery for power failure alarm is an article for consumption. It is recommended that the battery
will be replaced about every 3 years. Contact our sales representative or agent at the time of
replacement of the battery for recycling.
• Fan motors are expendable supplies. Replace them for about every 6 years. Contact our sales
representative or agent at the time of replacement of the fan motor.