Phcbi MDF-U443, Руководство по эксплуатации

Страница: 20 / 40

18
SETTING OF ALARM RESUME TIME
The alarm buzzer is silenced by pressing alarm buzzer stop key (BUZZER) on the control panel during
alarm condition.(The remote alarm sound and lamp are not silenced.)
The buzzer will be activated again after certain suspension if the alarm condition is continued. The
suspension time can be set by following the procedure shown in the Table 6 below.
The example in the table is based on the assumption that the desired duration is 20 minutes. The
duration is set to 30 minutes at the factory.
Table 6 Setting procedure for alarm resume time (change from 30 minutes to 20 minutes)
Description of operation Key operated Indication after operation
1 ----
The current chamber temperature is
displayed.
2
Press numerical value shift key for
5 seconds.
The first digit is flashed.
3
Set the figure to F25 with the
numerical value shift key and the
digit shift key.
When pressed, the figure of settable
digit changes.
The settable digit is shifted.
4 Press set key. SET
The current setting is displayed.
The second digit is flashed.
5
Scroll the figure to 020 with the
numerical value shift key. When pressed, the figure of settable
digit changes.
6 Press set key. SET
The setting is memorized and
the current chamber temperature is
displayed.
■ The settable alarm resume time is 10, 20, 30, 40, 50, or 60 minutes (The setting is 010, 020, 030, 040,
050, or 060). The buzzer would not resume if the resume time is set in 000.
■ It is recommended to set the alarm resume time when the freezer is not under alarm condition. The
setting during alarm condition is effective on the next alarm condition.
■ The alarm resume time set mode returns to the temperature display mode automatically when 90
seconds has passed without any key operation.
■ The setting of alarm resume time is invalid when the delay time for high and low temperature alarm is
set to 0.