Phason AutoFlex Connect, Руководство по установке, Страница: 6 / 54

Introducing AutoFlex Connect
6
Current Sensing Relay Module
(model
RM-2
)
The RM-2 Current Sensing Relay Module has two high-capacity, general-
purpose relays for controlling fans, heaters, lights, or any other equipment that
can be either on or off. Each relay includes a current sensor.
For installation information, read
Connecting equipment to Relay Modules
on
page 18.
Relay Module
(model
RM-4
)
The RM-4 Relay Module has four general-purpose relays. The RM-4 does not
have current sensors.
For installation information, read
Connecting equipment to Relay Modules
on
page 18.
Variable AC module
(model
VAC-1
)
The Variable AC Module has one variable output for controlling fans, heat
lamps, and heat mats. A temperature probe connector is included for heat mat
control. There is also a connection for a Single-Phase Slave.
For installation information, read
Connecting equipment to Variable AC
Modules
on page 20.
For information about Single-Phase Slave units, visit
www.phason.ca
.
Variable Chimney Module
(model
VCM-DC
)
The Variable Chimney Module has two DC-signal outputs (0 to 10 V) for
controlling a chimney fan and damper. There is also an input for connecting a
measuring fan.
For installation information, read
Connecting equipment to Variable Chimney
Modules
on page 21.
Variable DC Module
(model
VDC-4
)
The Variable DC Module has four DC-signal outputs (0 to 10 V) for
controlling equipment such as variable frequency drives.
For installation information, read
Connecting equipment to Variable DC
Modules
on page 22.