Page 12
Software/Communications
7. Click “Open” at the bottom of the putty window.
8. A Dialog box will open with the “hcout>” prompt.
9. Enter “?” to show a list of commands to give to the sensor.
10. Continuous Measurement mode will return a measurement every 100 ms.
11. Enter in a number from 1-9 to enter into autonomous measurement mode, where a sample is
given once every number of seconds equal to the number entered.
v - version
s - serial number
h - calibration header
p - pressure polynomial
t - temperature polynomial
M - continuous measure
R - reset
hcourt>
