5.
CARE
AND
MAINTENANCE
5.1
POWER
SOURCE
INSPECTION
During the usage of the gage, the current battery power will be shown on the display. When the
battery power is low, the customer should change the batteries promptly so that the measuring
accuracy won’t be influenced. The steps of changing batteries are as follow:
1.
Turn off the gage.
2.
Loosen the screws on the back of the unit and remove the battery cover.
3.
Take out the batteries and replace with new ones. Pay careful attention to polarity.
Attention:
when not using the gauge for extended periods of time, please remove batteries to prevent
any leakage or corrosion.
5.2
Maintenance:
1.
Always keep your gauge, probe, cable clean of any dirt, dust, fluids, etc to prevent early wear of these
parts.
2.
Be sure to avoid any caustic liquid such as alcohol or viscous fluids to prevent corrosion to the cover
and the display window. Clean with water only.
3.
Avoid scratching the surface of the probe. A worn probe will cause unstable readings.
5.3
Service/Support
Contact Phase II for all technical support and/or service.
To send your unit in for any type of service, please call for a RMA#.
(201)
962
‐
7373
