Installation and Configuration Guide
PS200 Touchscreen Administrator
28
Pref
Settings
Description
customKey >key
This property enables you to add commonly used special
characters to the PS200 virtual keyboard. For example, if your user
ID requires the hyphen, you can configure your PS200 to display
this character on the virtual keyboard.
Any printable key is supported except for the single quotation
marks ('). By default the custom key is set to use the "@" key.
Display > showcursor
This property allows you to edit the "showcursor" setting. By
default, this setting set to "No".
The default "showcursor" setting should be adequate in most
cases but it may be necessary to turn this on for testing purposes.
Setting the showcursor property to "Yes" displays the mouse
pointer.
Sound >level
This property sends a tone to the PS200 speaker every time a valid
touch occurs on the PS200 Touchscreen. The available sound
options are : Loud, Moderate, Mute and Quiet.
Station
The Station screen displays the following read-only
information about the Network Terminal entry in
the Pharos Database that corresponds to the
PS200:
Access*
Card Reader
Copier
Function
Logon
Network
Schema
Third Party Charging*
Uniprint*
Note:
The Station properties become
editable only when the Omega is in demo
mode. See Appendix 1 for details.
