PG Drives Technology R-NET OMNI Скачать руководство пользователя страница 78 | Manualshive

Страница: 78 / 174

PG Drives Technology R-NET OMNI Скачать руководство пользователя страница 78

PG D

RIVES

T

ECHNOLOGY

O

MNI

– S

TANDARD

- P

ROGRAMMING

SK78813/5

78

2.1.5 Puff Ramp Down

This sets the time allowed to ramp down to zero pressure from a hard puff.

When  a  hard  puff  has  finished,  there  is  a  period  of  time  when  the  pneumatic
pressure is below the Puff Threshold but still above the value for Deadband. This
could  be  falsely  interpreted by the Omni as a soft puff command. Puff Ramp
Down  allows  the  user  sufficient  time  to  reach  the  Deadband  without
unintentionally providing a soft puff. If this Deadband is not reached within the
Puff  Ramp  Down  time,  a  soft  puff  will  be  interpreted,  provided  the  pressure  is
below the Puff Threshold.

The programmable range is between 0ms and 2000ms in steps of 50ms.

2.1.6 Sip Ramp Up

This sets the time allowed to ramp up to a hard sip from zero pressure.

Whenever  a  hard  sip  is  attempted,  there  is  a  period  of  time  when  the
pneumatic pressure is below the Sip Threshold. This could be falsely interpreted
by the Omni as a soft sip command. Different users will have differing abilities in
terms of how quickly they can generate sufficient pressure to pass this threshold.
Sip  Ramp  Up  allows  the  user  more  time  to  reach  the  Sip  Threshold.  If  this
threshold  is  not  reached  within  the  Sip  Ramp  Up  time,  a  soft  sip  will  be
interpreted, provided the pressure is above the value set for Deadband.

The programmable range is between 0ms and 2000ms in steps of 50ms.

2.1.7 Sip Ramp Down

This sets the time allowed to ramp down to zero pressure from a hard sip.

When  a  hard  Sip  has  finished,  there  is  a  period  of  time  when  the  pneumatic
pressure is below the Sip Threshold but still above the value for Deadband. This
could  be  falsely  interpreted  by  the  Omni  as  a  soft  sip  command.  Sip  Ramp
Down  allows  the  user  sufficient  time  to  reach  the  Deadband  without
unintentionally  providing  a  soft  sip.  If  this  Deadband  is  not  reached  within  the
Sip  Ramp  Down  time,  a  soft  sip  will  be  interpreted,  provided  the  pressure  is
below the Sip Threshold.

«
...
76
77
78
79
80
...
»

Содержание R-NET OMNI















































































































































































Отзывы:

Нет отзывов