PFT 00 24 88 94 Скачать руководство пользователя страница 53

Страница: 53 / 100

CAYMAN Part 2 Overview – Operation - Spare parts lists

Maintenance

2017-03-22

41.3 Safety

Personnel

The maintenance works described here can be carried out by

the operator, unless marked otherwise.

Some maintenance work must only be carried out by specially

trained technical personnel or exclusively by the manufacturer.

Work on the electrical system must, in principle, be carried out

only by electricians.

Basic information

WARNING!
Risk of injury due to improperly carried out
maintenance work!

Improper maintenance can lead to severe injuries
or considerable property damage.

Therefore:

– Prior to starting the works ensure that there is

enough space to carry out the works.

– Ensure order and safety at the assembly site!

Loose, stacked components or components
lying about can cause accidents.

- If components were removed, ensure proper

assembly, put back all fastening elements and
observe torque indications for screws.

Electrical system

DANGER!
Danger of death from electric current!

There is danger to life if you come in contact with
electrical

components.

Activated

electrical

components can carry out uncontrolled movements
and cause serious injuries.

Therefore:

– Switch off the energy supply before starting any

work and secure against restarting.

Environmental protection

Observe the following notes on environmental protection when
carrying out maintenance works:

Remove the discharged, exhausted or surplus grease at all

greasing points that are lubricated manually and dispose of in
accordance with the local applicable regulations.

Collect replaced oil in suitable containers and dispose of in accordance with the local applicable
regulations.

Содержание 00 24 88 94





































































































Результаты поиска

Содержание 00 24 88 94

Отзывы:

Бренды по названию

Популярные бренды

PFT 00 24 88 94, Руководство по эксплуатации

Результаты поиска

Содержание 00 24 88 94

Отзывы:

Бренды по названию

Популярные бренды