PFT 00 24 88 94 Скачать руководство пользователя страница 39

Страница: 39 / 100

CAYMAN Part 2 Overview – Operation - Spare parts lists

Work on troubleshooting

2017-03-22

34.3 Lamp test

Fig.

57: Lamp test

NOTE!

Please press the push button “lamp test” (1) at
least once per shift to check the function of the
signal lamps.

Faulty operation of the system can thus be
prevented.

34.4 Faults

The following chapter describes possible causes for faults and the
activities carried out for their rectification.

In case faults occur frequently, shorten the maintenance intervals
in accordance with the actual load.

In the event of faults that cannot be rectified by means of the
following notes, kindly contact the dealer.

NOTE!
The following fault table gives information on who is
authorised to rectify the fault.

34.5 Safety

Personnel

The work for rectification of faults described here can be carried

out by the operator, unless marked otherwise.

Some works must be carried out only by specially trained skilled

personnel or exclusively by the manufacturer. Information on
this can be found in the description of the individual faults.

Work on the electrical system must, in principle, be carried out

only by electricians.

Personal protective equipment

The following protective equipment has to be worn for all
maintenance work:

Protective clothing

Protective goggles

Protective gloves

Safety shoes

Содержание 00 24 88 94





































































































Результаты поиска

Содержание 00 24 88 94

Отзывы:

Бренды по названию

Популярные бренды

PFT 00 24 88 94, Руководство по эксплуатации

Результаты поиска

Содержание 00 24 88 94

Отзывы:

Бренды по названию

Популярные бренды