Operating Instructions
Contador
Page 30 of 40
Revision 6
© 2019 – Pfeuffer GmbH
Figure 22: Stand with carousel for bags and bottles
When the operating mode »
1 cycle
« is selected, a carousel with full bags can be removed from the
CONTAFILL and a second carousel with empty bags inserted. The filling process can be continued while
the full bags from the first carousel are being removed and it is then provided with empty ones for the
next pass. The stand, which is available as an accessory, makes this process a lot easier.
Select the required quantity per bag or bottle in the CONTADOR menu:
Press once on the button
and enter the desired quantity e. g. 100 using the keyboard. Press
the button
to exit the entry.
Select the operating mode in the CONTADOR menu:
The keyboard combination
leads to the display of the
operating mode.
Select the »
1 cycle
« operating mode with the arrow buttons
.
Press the button
to exit the entry.
Press the button
to start the filling process.
The carousel moves to the next fitted filling position and the CONTADOR starts.
If the CONTAFILL does not find any bags or bottles at the available filling positions it switches off
automatically and the message »
bag missing
« appears in the display. Confirm this message with the
button
.
The filling process stops automatically after one cycle. After this the number of completely or partially
filled bags is indicated.
Example:
»
full: 6, half: 1
«
Six bags are completely filled according to the preselection. One bag is only filled partially (e. g. because
of an insufficient quantity of materials to be counted inside the feed container).
It is possible to change between count and the reading of the filled bags by means of the arrow
button
at any time (refer to
chapter 7.16.3
