Pfeiffer Vacuum SMARTVANE 55, Руководство по эксплуатации

Страница: 41 / 68

1
2
Fig. 13: Filling up operating fluid
1 Filling screw with seal 2 Sight glass
Refilling operating fluid
1. Switch off the vacuum pump.
2. Unscrew the filler screw.
3. Top up with the missing amount of operating fluid.
– Optimal fill level: Middle of the inspection glass
– The level difference of 5 mm in the sight glass corresponds to approx. 150 ml.
4. Screw in the filler screw.
– Pay attention to the seal.
– Tightening torque:
37 Nm
5. Switch the vacuum pump on.
6. Check level.
8.5 Configuring the connections with the Pfeiffer Vacuum parameter set
The electronic drive unit is pre-configured with the factory default basic functions and is ready for opera-
tion. For individual requirements, you can configure most connections for the electronic drive unit with
the parameter set.
8.5.1 Configuring the digital outputs
Option Description
0 = Rotation speed switchpoint reached active, once the switch-point is reached
1 = No error active, with trouble-free operation
2 = Error active, if the error message is active
5 = Set rotation speed reached active, once the set rotation speed switch-point is reached
6 = Pump on active, if pumping station on, motor on and no error
9 = Always "0" GND for the control of an external device
10 = Always "1" +24 V DC for the control of an external device
11 = Remote priority active active, if the remote priority is active
Tbl. 12: Configure parameters [P:019] and [P:024]
Operation
41/68