manualshive.com logo in svg

Pfeiffer Vacuum SMARTVANE 55, Руководство по эксплуатации

Поделиться
Скачать
Pfeiffer Vacuum SMARTVANE 55 Скачать руководство пользователя страница 11

Risks during installation

 DANGER

Danger to life from electric shock

Touching exposed and voltage-bearing elements causes an electric shock. Improper connection of 
the mains supply leads to the risk of touchable live housing parts. There is a risk to life.

► Before the installation, check that the connection leads are voltage-free.
► Make sure that electrical installations are only carried out by qualified electricians.
► Provide adequate grounding for the device.
► After connection work, carry out an earthed conductor check.

 WARNING

Danger of poisoning from toxic vapors

Igniting and heating synthetic operating fluid generates toxic vapors. Danger of poisoning if inhaled.

► Observe the application instructions and precautions.
► Do not allow tobacco products to come into contact with the operating fluid.

 WARNING

Risk of fatal injury due to electric shock on account of incorrect installation

The device's power supply uses life-threatening voltages. Unsafe or improper installation can lead to 
life-threatening situations from electric shocks obtained from working with or on the unit.

► Ensure safe integration into an emergency off safety circuit.
► Do not carry out your own conversions or modifications on the unit.

 WARNING

Tilting danger! Serious injury due to tilting of the product

There is a danger of the vacuum pump not attached tipping over due to changes in the center of 
gravity or incorrect loading. Serious injuries due to trapping or crushing of limbs, e.g. feet, are the re-
sult.

► Do not use the vacuum pump as a climbing aid.
► Do not exert any force on the product.
► Ensure that the product has a safe centre of gravity, when mounting components.
► Wear protective equipment , e.g. protective shoes

 WARNING

Risk of fatal injury due to electric shock caused by water damage

The device meets protection degree IP 20 according to EN 60529: 2014 and is not protected against 
water ingress. Vacuum pumps operated on the floor lead to leakage current in penetrating and sur-
rounding water. There is a danger to life from electric shock when making contact with live water.

► In case of water damage, disconnect the complete power supply from the area affected.
► Provide an on-site electrical fuse protection (e.g. RCD) in hazardous areas.
► When selecting the installation location, observe potential damage from water.

 CAUTION

Danger of injury from bursting as a result of high pressure in the exhaust line

Faulty or inadequate exhaust pipes lead to dangerous situations, e.g. increased exhaust pressure. 
There is a danger of bursting. Injuries caused by flying fragments, the escaping of high pressure, and 
damage to the unit cannot be excluded.

► Route the exhaust line without shut-off units.
► Observe the permissible pressures and pressure differentials for the product.
► Check the function of the exhaust line on a regular basis.

Safety

11/68

Содержание SMARTVANE 55





































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды