Pfeiffer Vacuum SMARTVANE 55 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 68

background image

CAUTION

Danger of burns on hot surfaces

Depending on the operating and ambient conditions, the surface temperature of the vacuum pump
can increase to above 70 °C. If access to the vacuum pump is unrestricted, there is a danger of burns
due to contact with hot surfaces.

► Install suitable touch protection if the vacuum pump is accessible to untrained persons.
► Allow the vacuum pump to cool down before carrying out any work.
► Contact Pfeiffer Vacuum for suitable touch protection in system solutions.

CAUTION

Risk of injury from trapping of body parts due to unexpected automatic startup

With open control input, the motor can start unexpectedly following extrinsic contact, if the mains volt-
age is already applied.
A risk exists of minor injury to fingers and hands (e.g., hematoma), from direct contact with the vac-
uum flange.

► Note the prescribed switch-on procedure for safe startup.

Risks during operation

WARNING

Danger of poisoning due to toxic process media escaping from the exhaust pipe

During operation with no exhaust line, the vacuum pump allows exhaust gases and vapors to escape
freely into the air. There is a risk of injury and fatality due to poisoning in processes with toxic process
media.

► Observe the pertinent regulations for handling toxic process media.
► Safely purge toxic process media via an exhaust line.
► Use appropriate filter equipment to separate toxic process media.

WARNING

Risk of burns from ejected hot oil mist

During operation, hot pressurized oil mist escapes from the operating fluid separator.

► Only operate the vacuum pump with the filler screw securely fitted.
► Open the locking screws on the separator only while the vacuum pump is switched off.

WARNING

Tilting danger! Serious injury due to tilting of the product

There is a danger of the vacuum pump not attached tipping over due to changes in the center of
gravity or incorrect loading. Serious injuries due to trapping or crushing of limbs, e.g. feet, are the re-
sult.

► Do not use the vacuum pump as a climbing aid.
► Do not exert any force on the product.
► Ensure that the product has a safe centre of gravity, when mounting components.
► Wear protective equipment , e.g. protective shoes

WARNING

Danger of poisoning from toxic vapors

Igniting and heating synthetic operating fluid generates toxic vapors. Danger of poisoning if inhaled.

► Observe the application instructions and precautions.
► Do not allow tobacco products to come into contact with the operating fluid.

Safety

12/68

«
...
10
11
12
13
14
...
»

Содержание SMARTVANE 55





































































Отзывы:

Нет отзывов

Похожие инструкции для SMARTVANE 55

Бренд: GE Страницы: 36

Бренд: EAS Electric Страницы: 165

Бренд: M&C Страницы: 18

Бренд: A.O. Smith Страницы: 2

Residential Gas Water Heaters

Бренд: A.O. Smith Страницы: 84

Бренд: Speck Страницы: 24

Бренд: Giant Страницы: 12

MAESTRO SMART 9HP

Бренд: Olimpia splendid Страницы: 52

Бренд: A.O. Smith Страницы: 74

Zoneline AZ91H18E E Series

Бренд: GE Страницы: 78

CENTRO-MATIC 85430

Бренд: Lincoln Страницы: 14

URG250H6N-475-264

Бренд: Bradford White Страницы: 32

Бренд: ITS Telecom Страницы: 20

Бренд: Kospel Страницы: 12

Бренд: Pentair Hydromatic Страницы: 20

Бренд: Penguin Страницы: 10

Бренд: Graco Страницы: 20

Residential Indoor Gas Tankless Water Heater

Бренд: Rheem Страницы: 14

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды