Pfeiffer Vacuum HiCube 300 H Pro, Руководство по эксплуатации

Страница: 35 / 80

► Connect only matching accessory devices to the electronic drive unit.
► Use the Y-connector from the accessories range if you want to connect 3 or 4 devices to the
TC 400.
5.9 Connecting measuring tubes
The connecting socket with designation " X3 " is used to connect a Pfeiffer Vacuum transmitter.
Measuring tubes Display on the DCU [P:738]
APR 250/260 CMRx61
CMR 261/361 CMRx61, following manual selection
CMR 262/362 CMRx62, following manual selection
CMR 263/363 CMRx63, following manual selection
CMR 264/364 CMRx64, following manual selection
CMR 365 CMRx65, following manual selection
MPT 200 AR PKR2xx
PCR 280 TP/PCR
PKR 251/261/360/361 PKR2xx
PPT 200 AR TP/PCR
RPT 200 AR TP/PCR
TPR 270/280/281 TP/PCR
Tbl. 8: Available Pfeiffer Vacuum transmitters for connection to a DCU
Procedure
1. Connect a pressure measuring tube to connection " X3 " of the DCU as required.
2. The corresponding connection cable is available as a Pfeiffer Vacuum accessory.
3. Change the name of the transmitter as required by setting the parameter [P:738].
5.10 Ground pumping station
Fig. 17: Grounding cable
Required aids
● Screw M4 × 8
● Shake proof washer M4, if required
Installation
35/80