Pfeiffer Vacuum DUO 35 Скачать руководство пользователя | Manualshive

Страница: 9 / 66

background image

Risks during installation

WARNING

Danger of injury from electric shock

Contact with live parts causes electric shock.

► Make sure that connection leads are voltage-free.
► Make sure that electrical installations are only carried out by qualified electricians.
► Provide adequate grounding for the device.

WARNING

Danger of poisoning from toxic vapors

Igniting and heating synthetic operating fluid generates toxic vapors. Danger of poisoning if inhaled.

► Observe the application instructions and precautions.
► Do not allow tobacco products to come into contact with the operating fluid.

Risks during operation

WARNING

Danger of poisoning due to emission of toxic process gases from the exhaust

During operation with no exhaust line, the vacuum pump allows exhaust gases and vapors to escape
freely into the air. In processes involving toxic media, there is a risk of injury and danger to life due to
poisoning.

► Observe the relevant regulations for handling toxic substances.
► Safely purge toxic process gases via an exhaust line.
► Use suitable filter equipment to separate toxic substances.

CAUTION

Risk of injury from bursting due to high pressure in the exhaust line

Faulty or insufficient exhaust lines cause hazardous situations, e.g. increase in exhaust pressure.
There is a risk of bursting. It is not possible to rule out the risk of injuries due to broken pieces flying
around, high escaping pressure and damage to the equipment.

► Lay the exhaust line without shut-off units.
► Observe the permissible pressures and pressure differentials of the product.
► Check the exhaust line regularly for correct function.

CAUTION

Danger of burns on hot surfaces

Depending on the operating and ambient conditions, the surface temperature of the pump can rise to
above 70°C.

► Provide suitable touch protection.

Risks during maintenance

WARNING

Danger of injury from strong magnetic field

There is a risk of injury for people with pacemakers and medical implants.

► Make sure that such individuals do not enter the sphere of influence (≤ 2 m) of the magnetic field.

– Identify rooms in which magnetic couplings are openly accessible with the symbol: "

No ac-

cess for people with pacemakers

"

► Always keep disassembled couplings away from computers, data carriers, and other electronic

components.

Safety

9/66

«
...
7
8
9
10
11
...
»

Содержание DUO 35



































































Отзывы:

Нет отзывов

Похожие инструкции для DUO 35

Little Sea-ox FCD-30

Бренд: Haier Страницы: 23

Бренд: Palm Страницы: 20

Бренд: Bard Страницы: 50

Бренд: Larzep Страницы: 14

Бренд: P.Lindberg Страницы: 46

Бренд: OSO Страницы: 44

EKHWS 150D3V3 Series

Бренд: Daikin Страницы: 20

Бренд: CALPAK Страницы: 35

Бренд: Homa Страницы: 32

Бренд: D-D The Aquarium Solution Страницы: 8

Бренд: German pool Страницы: 20

Optyma OP-SMLZ Series

Бренд: Danfoss Страницы: 4

Бренд: GPI Страницы: 26

Бренд: Eaton Страницы: 20

Бренд: Pattfield Ergo Tools Страницы: 154

Бренд: salmson Страницы: 20

Бренд: Lochinvar Страницы: 76

PANTHER HP Series

Бренд: Balcrank Страницы: 18

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды