Pfaff Creative 2134 Скачать руководство пользователя страница 60

Страница: 60 / 98

4:6

Buttonhole mode button

The Buttonhole mode button is used for toggling

between slit length (A), density (B) and balance (C)

mode when a buttonhole is selected.

If the buttonhole will be sewn manually only the

balance and density modes are available.

Use the stitch length buttons (52) to change the set-

tings in the currently active mode.

The settings will remain until another stitch is

selected.

Buttonhole density

By adjusting the density of the buttonhole you can

change the closeness of the satin stitches without

changing the length of the complete buttonhole.

Press the - stitch length button (52) to increase

the density and the + stitch length button (52) to

decrease the density.

Buttonhole balance

The balance adjusts the forward and backward feed-

ing of the machine. If the machine is unbalanced the

right and left columns of the buttonhole will be sewn

uneven.

Press the - stitch length button (52) to adjust the

backward feeding, this increases the density in the

left column. Press the + stitch length button (52) to

adjust the forward feeding, this increases the density

in the right column.

Buttonhole length

When a buttonhole is selected the machine auto-

matically enters the buttonhole slit length mode.

The buttonhole slit length icon and the slit length is

shown on the window.

Change the slit lenght by pressing the stitch length

buttons (52). Remember to always set the length

little bit longer than the button diameter.

Содержание Creative 2134



































































































Результаты поиска

Содержание Creative 2134

Отзывы:

Похожие инструкции для Creative 2134

Бренды по названию

Популярные бренды

Pfaff Creative 2134, Руководство пользователя

Результаты поиска

Содержание Creative 2134

Отзывы:

Похожие инструкции для Creative 2134

Бренды по названию

Популярные бренды