Pfaff 8304-020, Инструкция по эксплуатации

Страница: 16 / 50

Controls
7 - 2
7
.04
Temperature regulator / fault indicator
●
The temperature can be set with the
buttons 1 .
●
Display 2 shows the required value and
display 3 the actual value.
●
When the following faults occur, fault
indicator 4 lights up:
- Fault on temperature regulator or sensor.
- Overheating of the heating cartridge.
- hot-air pressure too low.
When a fault has occurred:
●
Eliminate the fault.
●
Acknowledge elimination of fault by
pressing fault indicator button (lamp off).
Fig. 7 - 04
1
3
2
4
7
.03
Locking foot switch
(optional)
●
Following functions are triggered by foot
switch 1 and 2 .
Switch 1 : Positioning the workpiece (top
feed roller is lowered)
Switch 2 : Starting the heat-sealing pro-
cess (the heating element is
swung into position/feed rollers
are started)
The functions triggered by
pedal 1 differ according to the
operational mode of the machine
(see Chapter 7.08 Operational
modes-selection switch ) .
Fig. 7 - 03
1
2