Pfaff 3801-11/071 Скачать руководство пользователя страница 60

Страница: 60 / 126

Input

11 - 14

Dialog window

The dialog window shows questions and additional buttons for the answers.

Enter button

Yes for one seam program.

All button

Yes for one or all marked seam programs.

Esc button

No for one or all marked seam programs.

Next button

No for one seam program.

Machine configuration

With the MDAT-function the machine configuration can be copied to/from SD-Card or can be

deleted on the SD-Card (filename: MDAT).

Format SD-Card

The Format-function formats the SD-Card.

If the SD-Card is not readable, it is new formatted. If the SD-Card is readable and the

directory \P3801 for the 3801-machine exists then all seam programs and the machine

configuration (MDAT) are deleted in this directory.

If the directory \P3801 for the 3801-machine does not exist, only the directory \P3801 is

created. So all other files and directories on the SD-Card are not corrupted.

It is recommended to use SD-Cards with a maximum capacity of 2 GB.

Содержание 3801-11/071































































































































Результаты поиска

Содержание 3801-11/071

Отзывы:

Pfaff 3801-11/071, Инструкция по эксплуатации, Страница: 60 / 126

Результаты поиска

Содержание 3801-11/071

Отзывы: