Pfaff 3801-11/071, Инструкция по эксплуатации, Страница: 44 / 126

Sewing
10 - 6
Fullness adjustment
Displays and adjusts the programmed fullness, see Chapter 10.03.01 Adjusting the
fullness.
Program interruption
Interrupts the program sequence, see Chapter 10.03.03 Program interruption
Basic size / garment size
Displays the basic size and opens a menu for selecting the garment size, see Chapter
10.03.02 Selecting the garment size.
Sewing foot raised
When this function is activated, the sewing foot is raised after sewing stops.
Sewing foot lowered after thread trimming
When this function is activated, the sewing foot is not raised after thread trimming.
●
Sewing is carried out with the pedal and knee switch functions, see Chapter 7.02 Pedal.
If the knee switch is used to switch between the seam sections, parameter
"202" must be set at "ON". With this parameter setting it is only possible to
change seam sections with the knee switch.
10
.03.01
Fullness adjustment
In programmed sewing the programmed fullness can be corrected directly without changing
the seam program. It is only possible to enter a fullness adjustment if an amount of fullness
is programmed in at least one seam section. The fullness adjustment can have an effect on
the complete seam program or merely on the current seam section.
- If the fullness adjustment in the first seam section is entered before sewing begins, then
the fullness adjustment applies to the complete seam program (only seam sections with
programmed fullness) and is maintained.
(Fullness small, adjustment value large)
- If the fullness is adjusted after sewing begins, the adjustment only has effect on the
current seam section.
(Fullness large, adjustment value small)