Pfaff 3586-2/02, Инструкция по эксплуатации, Страница: 37 / 156

10 - 2
Sewing
10
.02
Automatic Program Start
In the case of an automatic program start, the program sequence begins as soon as the
loading table with the workpiece is moved forward.
Starting position of the machine
Explanation of the symbols in the pictogram bar:
Automatic program start (number key 1)
The pictogram indicates that the program starts automatically.
If the Manual program start function is selected, the machine switches over to this
function, see Chapter 10.03 Manual program start .....
Starting position
(number key 4)
This is a direct function to bring the machine into its starting position.
Sewing foot up/down, threading aid (number key 5)
This is a direct function for raising or lowering the sewing foot. At the same time the
pressure bar is switched on or off and if necessary moved into the threading position.
Depth correction dependent on the material
(number keys 6 – 0)
The depth specified in the seam program is corrected according to the function selected.
The maximum value for the depth correction can be set in the input mode under the Sewing
head functions function, see Chapter 11.05 Functions in the INPUT mode . The symbol for
the selected depth correction appears on a dark background.
The depth correction value is reduced by 100%
of the specified depth.
The depth correction value is reduced by 50%
of the specified depth.
The specified depth remains unchanged.
The depth correction value is increased by 50% of the specified depth.
The depth correction value is increased by 100% of the specified depth.
to
1 2 3 4 5 6 7 9 0
Enter
8
Esc
Clear
bdf
100 100 20.5 0
BOBBIN 0 / 10000