Sewing
40
Functions in programmed sewing, see also
chapter 7.05.03 Function keys
:
Start backtack on/off
Change seam construction diagram*
End backtack on/off
Line selection*
Edge trimmer on/off
Display the piece counter on/off
Template drive on/off
Support reel on/off
Raise sewing foot after
thread trimming on/off
Corner programming*
Thread trimming on/off
Display the cycle time on/off
Alternating sewing
Start inhibitor on/off
* The function is available from mechanic level "b", see
chapter 11
.
02
.
01
Selecting the
user level
.
O
Insert the workpiece, see
chapter 9.09 Inserting the workpiece
.
O
Select the program number of the desired seam construction diagram by pressing the
+/- keys (P)
.
O
Start the seam sequence by pressing the pedal, see
chapter 7.03 Pedal
.
10
.03
Entering the authorisation code
Some keys are locked for operators. A double beep sounds when these keys are pressed.
An authorisation code needs to be entered and confirmed with "Enter" to obtain authorisa-
tion. Authorisation is automatically granted if logged on as a mechanic.
CODE: 3511
O
Press the "Enter code" key
O
Enter the desired authorisation code (e.g.
3511
) by pressing the
+/- key (A;B;C and D)
.
O
Finish the input by pressing the "Enter" key
+/- key (L)