86
Adjustment
104-022
13
.19
Adjusting the thread catcher
(only on the PFAFF 3307-3/..)
Requirement
In the cutting position the hook
3
should be vertical and the thread catcher
1
should grip
reliably in the stitch triangle.
●
Switch on the machine and set parameter "403" at the maximum value.
●
Select the sewing mode and carry out a sewing operation.
●
Switch the machine off in the cutting position at the on/off switch and disconnect it
from the pneumatic power supply.
●
Carry out the cutting operation manually, checking the
requirement
while doing so.
●
If necessary, switch on the machine and with the parameters "614" and "615" set the
thread catcher
1
in accordance with the
requirement
.
●
If the hook
3
is not vertical in the cutting position, check the setting in accordance with
Chapter 13.05 Top needle bar position (reference position).
●
Switch off the machine and check the cutting operation.
●
Switch on the machine, reset parameter "402" to its initial value and switch off the
machine.
Fig. 13 - 17
64-079
1
3
1
Содержание 3307-3 Series
