53
Input
11
.02
Seam pattern input on sub-class -9/.. machines
Switch on the machine.
Select the program number and button type, see Chapter
9.03.01 Selecting the button
type and program number.
Call up the programming mode
●
●
●
Select the desired parameter (
P01, P02
etc.) with the left
+/- keys
.
With the two corresponding
+/- keys
move to or select the desired positions (
X
and
Y
)
or values.
Parameter input for stem wrapping
P01
Cross stitch position material side
P02
Cross stitch position button side
P07
Total number of stitches (
1-99)
Operate the left
+/- keys
to take over the values entered and to call up the next or
previous parameter.
Press the "programming" key to take over the values entered and to call up the sewing
mode.
To achieve the best results, cutting should take place at the left needle entry
position. This is achieved through the number of stitches and the location of the
needle entry positions.
●
●
●
●
N o
X
Y
P 0 1
- 1 0
2 0
Содержание 3307-3 Series
