10
CN2
CN2
LOAD
-V
+V
Figure
Connection of
3-4
Remote Sense
Figure
Connection of
3-5
Local Sense
3
1
2
2
1
4
RHP-1U
RHP-1U
-V
-V
+V
+V
+S
+S
-S
-S
Twisted wires
3.15
Hot Swap Operation
◎
Built-in "Oring MOSFET", the units can be installed/removed without tuning power off.
Insert units: Grasp the handle and push into the rack shelf through the rail.
◎
◎
Pull out units: Press the clip shown in Figure 3-7 and pull it out.
Caution: Please use adequate force to insert the RCP/RCB-1600 into the rack
. Slamming units into the rack can damage the connectors both
s
helf
on the rear of the units and inside the rack.
Figure 3-7 Illustration of how to remove the RCP/RCB-1600 from a rack
Press down
Figure 3-6 Illustration of how to insert the RCP/RCB-1600 into a rack
"Click"
3.16
Parallel Operation
◎
P
shelf
arallel operation in a single rack
is only suitable for the identical units (with the same model and the same output voltage/current).
Each rack shelf (RHP-1U ) has built-in parallel connection/wiring. Once
RCP or RCB units insert
in the rack shelf then
have
ed
hese
t
◎
.
front end unit are operated in parallel
.
Please refer to 3.13 & 3.14 for the connection/wiring of other functions
◎
3.16.1
Operation of Single Rack Shelf
12
RCB-1600-RHP-1U_1610-21407-0001-E-0420