PEUGEOT Satelis 400, Руководство по ремонту

Страница: 15 / 84

TIGHTENING TORQUES
13
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Motocycles
„ Body panels
„
Cycle part.
„
Standard
Front mudguard 0.8 to 1.2 m.daN
Handlebar cover 0.2 to 0.4 m.daN
Front shield panels 0.2 to 0.4 m.daN
Rear shield 0.2 to 0.4 m.daN
Bottom panel 0.2 to 0.4 m.daN
Floor panel 0.4 to 0.6 m.daN
Saddle storage compartment 0.8 to 1.2 m.daN
Rear panels 0.2 to 0.4 m.daN
Grab handle 2 to 2.5 m.daN
Rear mudguard 0.4 to 0.6 m.daN
Front wheel spindle 6.5 m.daN
Rear wheel bolt 2.5 m.daN
Rear wheel spindle nut 13.5 m.daN
Linkrod to engine pivot 8 m.daN
Linkrod to frame pivot 8 m.daN
Linkrod connecting pin 8 m.daN
Linkage torque arms 3.8 m.daN
Shock absorber top mount 4.5 m.daN
Shock absorber bottom mount 4.5 m.daN
Exhaust to cylinder head mounting nut 2.2 m.daN
Exhaust to casing mounting bolt 2.2 m.daN
Exhaust system strap 1.8 m.daN
Exhaust clamp 1.8 m.daN
Centre stand holder 2.2 m.daN
Suspension arm 2.8 m.daN
Lambda sensor 4.5 m.daN
Upper cone (in 2 operations) 4/2.2 m.daN
Upper cone locknut Hand tightened
Steering locknut 7.5 m.daN
Front brake caliper 2.5 m.daN
Rear brake caliper 2.5 m.daN
Front brake disc 3 m.daN
Rear brake disc 3 m.daN
Handle bar 4 m.daN
Nut and bolt 5 mm diameter 0.6 m.daN
Nut and bolt 6 mm diameter 1 m.daN
Nut and bolt 8 mm diameter 2.2 m.daN
Nut and bolt 10 mm diameter 3.5 m.daN
Nut and bolt 12 mm diameter 5.5 m.daN