PEUGEOT e-2008, Руководство пользователя

Страница: 46 / 164

45
Lighting and visibility
Windscreen wipers
To select the wiping speed: raise or lower the
stalk to the desired position.
Fast wiping (heavy rain)
Normal wiping (moderate rain)
Intermittent wiping (proportional to the
vehicle’s speed)
Single wipe (press down and release).
or
Automatic.
Refer to the corresponding section.
the windscreen wiper active, it is
necessary to operate the control stalk to
reactivate the wiping when the ignition is
than 1 minute).
In position
1
or
2
, the wiping frequency is
automatically reduced when the speed of
the vehicle drops below 3 mph (5 km/h).
When the speed is above 6 mph (10 km/h)
again, the wiping frequency returns to the
original frequency (fast or normal).
Single wipe
Front screenwash
Pull the wiper control stalk towards you and
hold.
The screenwash and windscreen wipers operate
for as long as the control stalk is pulled.
screenwashing ends.
With automatic air conditioning, any
action on the screenwash control results
in temporary closure of the air intake to avoid
odours inside the passenger compartment.
To avoid damaging the wiper blades, do
not operate the screenwash if the
screenwash reservoir is empty.
Only operate the screenwash if there is no
and hindering visibility. During the winter
period, use "very cold climate" rated products.
Never top up with water.
Rear wiper
Turn the ring to align the desired symbol with
the marking.
Intermittent wipe
Wash-wipe
Reverse gear
When reverse gear is engaged, the rear wiper
will come into operation automatically if the front
windscreen wipers are operating.
This function is set via the Driving /
Vehicle touch screen menu.
In the event of accumulation of snow or
a towing system, deactivate the automatic
rear wiper via the touch screen’s Driving/
Vehicle menu.
Rear screenwash
Turn the ring all the way towards the
dashboard and hold.
The screenwash and the wiper operate for as
long as the ring remains turned.
screenwashing ends.