PEUGEOT e-2008, Руководство пользователя

Страница: 102 / 164

101
Practical information
For more information on the Electric
parking brake , refer to the
corresponding section.
Brake pads
Brake wear depends on the style of
driving, particularly in the case of vehicles
used in town, over short distances. It may be
necessary to have the condition of the brakes
checked, even between vehicle services.
Unless there is a leak in the circuit, a drop in the
are worn.
After washing the vehicle, moisture, or in
wintry conditions, ice can form on the
be reduced. Gently dab the brakes to dry and
defrost them.
Brake disc/drum wear
For any information on checking brake
disc/drum wear, contact a PEUGEOT
all tyres,
/
Wheels and tyres
including the spare wheel, must be
checked on "cold” tyres.
The pressures indicated on the tyre pressure
label are valid for "cold" tyres. If you have driven
for more than 10 minutes or more than 6 miles
(10 kilometres) at over 31 mph (50 km/h), add
0.3 bar (30 kPa) to the values indicated on the
label.
consumption. Non-compliant tyre
pressure causes premature wear on tyres and
holding - risk of an accident!
Driving with worn or damaged tyres reduces the
braking and road holding performance of the
vehicle. It is recommended to regularly check the
condition of the tyres (tread and sidewalls) and
wheel rims as well as the presence of the valves.
When the wear indicators no longer appear set
back from the tread, the depth of the grooves is
less than 1.6 mm; it is essential to replace the
tyres.
Shock absorbers
It is not easy for drivers to detect when
shock absorbers are worn. Nevertheless,
the shock absorbers have a major impact on
road holding and braking performance.
For your safety and driving comfort, it is
important to have them regularly checked by a
rotation, ground clearance, the speedometer
holding.
can cause the ESC to mistime.
Timing and accessory kits
The timing and accessory kits are used
from the time the engine is started until it
time.
A faulty timing or accessory kit can damage
the engine, rendering it unusable. Observe the
recommended replacement frequency, stated in
distance travelled or time elapsed, whichever is
With manual or EAT6
automatic gearbox and
electric parking brake
Release procedure
► With the engine running and while depressing
the brake pedal, move the gear selector to the
neutral position.
►
the ignition.
► Release the brake pedal, then switch on the
ignition again.
► While depressing the brake pedal, press the
control lever to release the parking brake.
►
ignition.
Reverting to normal operation
► While depressing the brake pedal, start the
engine.