PEUGEOT 508, Руководство пользователя

Страница: 216 / 340

214
i
!
Checks
On vehicle fitted with HDi engines, the fuel
system must be primed if you run out of fuel;
refer to the engine compartment view on the
"Diesel engine" page.
Running out of fuel (Diesel)
If the tank on your vehicle is fitted with
a misfuel prevention device, refer to the
section "Access - § Misfuel prevention
(Diesel)".
) Fill the fuel tank with at least five litres of
diesel.
) Open the bonnet.
) If necessary, unclip the styling cover for
access to the priming pump.
)
Squeeze and release the priming pump
repeatedly until resistance is felt (there may
be resistance at the first press).
) Operate the starter until the engine starts
(if the engine does not start at the first
attempt, wait around 15 seconds before
trying again).
) If the engine does not start after a few
attempts, operate the priming pump again
then start the engine.
) Clip the styling cover back in place.
) Close the bonnet.
1.6 litre HDi engine
) Fill the fuel tank with at least five litres of
Diesel.
) Open the bonnet.
) If necessary, unclip the style cover for
access to the priming pump.
)
Squeeze and release the priming pump
repeatedly until fuel appears in the
transparent pipe.
) Operate the starter until the engine starts
(if the engine does not start at the first
attempt, wait around 15 seconds before
trying again).
) If the engine does not start after a few
attempts, operate the priming pump again
then start the engine.
) Put the style cover back in position and
clip it in place.
) Close the bonnet.
2 litre and 2.2 litre HDi
engines
If the engine does not start first time,
don't keep trying. Start the procedure
again from the beginning.