PEUGEOT 508, Руководство пользователя

Страница: 202 / 340

200
i
!
!
Practical information
12 V battery
The presence of this label indicates
the use of a 12 V lead-acid battery with
special technology and specification,
for which the involvement of a
PEUGEOT dealer or qualified
workshop is required when replacing or
disconnecting the battery.
Failure to observe this recommendation
may cause premature wear of the
battery.
After refitting the battery, the Stop &
Start system will only be active after
several hours depending on the climatic
conditions and the state of charge of the
battery (up to about 8 hours).
The battery is located under the bonnet.
To gain access to it:
)
open the bonnet using the interior release
lever, then the exterior safety catch,
) remove the plastic cover to gain access to
the two terminals,
) unclip the fusebox to remove the battery,
if necessary.
Access to the battery
) Raise the locking tab fully.
Disconnecting the cables
Reconnecting the cables
) Position the open clip 1 of the cable on the
positive terminal (+) of the battery.
) Press vertically on the clip 1 to position it
correctly against the battery.
) Lock the clip by spreading the positioning
lug and then lowering the tab
2 .
Do not force the tab as locking will not
be possible if the clip is not positioned
correctly; start the procedure again.