PEUGEOT 508, Руководство пользователя

Страница: 181 / 340

8
179
!
Practical information
Removing the cartridge
) Stow the black pipe.
) Detach the angled base from the white pipe.
) Support the compressor vertically.
) Unscrew the cartridge from the bottom.
Beware of discharges of fluid.
The expiry date of the fluid is indicated
on the cartridge.
The sealant cartridge is designed for
single use; even if only partly used,
it must be replaced.
After use, do not discard the cartridge
into the environment, take it to an
authorised waste disposal site or a
PEUGEOT dealer.
Do not forget to obtain a new sealant
cartridge, available from PEUGEOT
dealers or from a qualified workshop.
Checking tyre pressures/
inflating accessories
You can also use the compressor, without
injecting any product, to:
- check
or adjust the pressure of your tyres,
- inflate other accessories (balls, bicycle
tyres...).
) Turn the selector A to the "Air"
position.
) Uncoil the black pipe H fully.
) Connect the black pipe to the
valve of the wheel or accessory.
If necessary, fit one of the adaptors
supplied with the kit first.
) Connect the compressor's electrical
connector to the vehicle's 12 V socket.
) Start the vehicle and let the engine run.
) Adjust the pressure using the compressor
(to inflate: switch B in position "I" ; to
deflate: switch B in position "O" and press
button C ), according to the vehicle's tyre
pressure label or the accessory's pressure
label.
) Remove the kit then stow it.