3
COMFORT
53
REAR SEATS (SALOON)
Note:
the seat cushion
1
can be
removed with care to increase the
vo-lume of the load space.
Squeeze the seat cushion fi xings to
detach them from their fastenings.
When repositioning:
fold up the seat back
2
and lock it
(the red marker of control
3
should
no longer be visible),
fold up the seat
1
,
refi t the head restraints if they were
removed.
Locking/unlocking the access
to the boot via the rear seats
Your vehicle's boot can be isolated
from the passenger compartment.
The red indicator on the control
3
should no longer be visible. If it is,
push the seat fully.
Insert the ignition key in the lock
4
.
Take care not to trap the seat
belt and to position the buckle
of each strap correctly in its
respective clasp before folding
down the seat back. This will enable
you to reposition the seat backs with
their seat belts and clasps ready to ac-
commodate your rear passengers.
To fold down the rear left seat or the
rear right seat, always start with the
seat, never with the seat back (risk of
damage):
move the front seat(s) forward if
necessary,
place the head restraints in the low
position or remove them if neces-
sary,
Check that the seat belt strap is
positioned correctly at the side of the
seat back,
Ensure that the side seat belt straps
are fastened in their clasp (the centre
seat belt must not be fastened),
lift the front of the seat cushion
1
,
tilt the seat cushion
1
against the
front seat(s),
pull control
3
forwards to unlock
the seat back
2
,
fold down the seat back
2
.
Содержание 407 2009
