PEUGEOT 407 2009, Руководство пользователя

Страница: 130 / 250

10 10
PRACTICAL INFORMATION
113
Fitting a wheel

Position the wheel.

Tighten the bolts by hand.

Partly tighten the bolts using the
wheelbrace.

Fold the jack 2 and remove it.

Fully tighten the bolts using the
wheelbrace 1 .

For vehicles with steel wheels,
refi t the wheel trim starting by plac-
ing its notch facing the valve and
press with the palm of the hand.

For vehicles with alloy wheels, refi t
the covers.

Put the tool holder back in position.
This helps to keep the boot fl oor in
its correct position, to prevent any
deformation of the fl oor when loaded.

Tighten the spare wheel securing
strap to prevent noise and for your
safety in the event of impact.
Punctured tyre warning
light
Information on the instrument
panel: Reminder: for your safety, always
change a wheel:
-
on level, stable, non-slippery ground,
- with the handbrake applied,
-
with fi rst or reverse gear engaged (po-
sition P for the automatic gearbox),
- never go underneath a vehicle
which is supported only by a jack.
Tyre under-infl ation detection
system warning light
These original wheels are fi tted with a
pressure sensor (see paragraph "Tyre
under-infl ation detection"). The alarm
which detects the removal or absence
of a wheel fi tted with the indicator
sensor signals the anomaly. Have
the wheel repaired and checked by a
PEUGEOT dealer.
After changing the wheel:
- have the tightening of the bolts and
the tyre pressure of the spare wheel
checked as soon as possible.
- have the punctured wheel repaired
and refi t it to the vehicle as soon as
possible.
- have the spare wheel checked and
replace it in its boot recess.
Recommendations when using the
temporary spare wheel *
Your vehicle may be equipped with a
spare wheel with a different rim to that
of the standard wheel.
After use, replace it as soon as possible.
Follow the recommendations below
to avoid any alteration in vehicle han-
dling:
-
do not drive above 50 mph (80 km/h) ,
- do not fi t a wheel trim,
- drive carefully,
- check the infl ation pressure indi-
cated on the label.
* According to version and country.