PEUGEOT 308 SW 2009, Руководство пользователя

Страница: 86 / 329

i
!
80
ACCESS
Starting the vehicle

Insert the key in the ignition switch.
The system recognises the starting
code.

Turn the key fully towards the
dashboard to position 3 (Starting) .

When the engine starts, release the
key.
Switching the vehicle off

Immobilise the vehicle.

Turn the key fully towards you to
position 1 (Stop) .

Remove the key from the ignition
switch.
Remote control problem
Following disconnection of the vehicle
battery, replacement of the remote con-
trol battery or in the event of a remote
control malfunction, you can no longer
unlock, lock or locate your vehicle.

First of all, use the key in the lock to
unlock or lock your vehicle.

Then, reinitialise the remote control.
If the problem persists, contact a
PEUGEOT dealer as soon as possible.
Changing the battery
Battery ref.: CR1620/3 volts.
Reinitialisation

Switch off the ignition.

Turn the key to position 2 (Ignition) .

Press the closed padlock immedi-
ately for a few seconds.

Switch off the ignition and remove
the key from the ignition switch.
The remote control is fully operational
again.
If the battery is fl at, you are in-
formed by lighting of this war-
ning lamp, an audible signal
and a message on the multi-
function screen.
This replacement battery is available
from PEUGEOT dealers.
Key left in the "Ignition"
position
If the key has been left in the ignition
switch, the ignition will be switched
off automatically after one hour.
To switch the ignition back on, turn
the key to position
1 (Stop) , then
back to position 2 (Ignition) .

Unclip the casing using a coin at the
notch.

Slide the fl at battery out of its
location.

Slide the new battery into its location
observing the original direction.

Clip the casing.

Reinitialise the remote control. A heavy object (key fob...), attached
to the key and weighing down on
its shaft in the ignition switch, could
cause a malfunction.