PEUGEOT 308 SW 2009, Руководство пользователя

Страница: 159 / 329

i
! i
145
DRIVING
Sequential mode

When the vehicle has moved off, se-
lect position M to change to sequential
mode.
AUTO disappears and the
gears engaged appear in suc-
cession on the instrument
panel screen.
The gear change requests are only car-
ried out if the engine speed permits.
It is not necessary to release the accel-
erator during gear changes.
When braking or slowing down, the
gearbox changes down automatically to
permit reacceleration of the vehicle in
the correct gear.
The gearbox is then operating in auto-
active mode, without any action on the
part of the driver. It continuously selects
the most suitable gear in relation to the
following parameters:
-
style of driving,
- profi le of the road.
AUTO and the gear engaged
appear on the instrument panel
screen.
Automatic mode

Following use of the sequential
mode, select position A to return to
the automatic mode.
"Auto sequential mode"
This mode enables you to overtake, for
example, remaining in automatic mode
while using the functions of the sequen-
tial mode.

Operate steering wheel control pad-
dle + or - .
The gearbox engages the gear request-
ed if the engine speed permits. AUTO is
still displayed on the instrument panel.
After a few moments without any action
on the controls, the gearbox resumes
automatic control of the gears.
At very low speed, if reverse gear
is requested, this will only be taken
into account when the vehicle is
immobilised. The
Foot on brake
warning lamp may fl ash on the in-
strument panel to prompt you to
brake.
At high speed, if reverse gear is re-
quested, the
N indicator lamp will
fl ash and the gearbox will change
to neutral automatically. To engage
a gear again, return the lever to po-
sition
A or M .
On sharp acceleration, the gearbox
will not change up unless the driver
acts on the gear lever or the steering
mounted controls.
Never select neutral
N while the
vehicle is moving.
Only engage reverse gear
R when
the vehicle is immobilised with the
brake pedal pressed.
For optimum acceleration, for exam-
ple when overtaking another vehicle,
press the accelerator pedal fi rmly
past the point of resistance.